Kit basic

The Cat ´s configuration displayed to see is: wide 1.57 m with a 2.50 m mast.
This kit will be: wide: 1.34 m with a 2.50 m mast.
There will be quite a lot of work to do still: adjusting and gluing parts together, grinding filling out, painting & polishing, stainless steel fittings and rigging will be pre-polished, you will have to do the final fine work.

Fiber glass parts (except the ones with wood combination), will have white pigment added to the epoxy (if you would like diffrent, just ask for it).

A list of parts included for this kit you will see at your right.

If you wish to order parts for a different configuration, please look at the "parts" section, and make an exact list of those to be exchanged or added.
A manual guide and drawings will be provided to direct you during the prosses.

Fully hand made, it takes no less than 42 working days for us to have this kit ready. It will be made only on request for the time beeing.

Block`s; there are found at your local RC Shop, we do handcraft them, but they are a little high in price, so it is up to you to include them.

Mast comes in two sections, for easy transport, however, if you prefer, and can afford shipment costs; we can deliver it in one piece.

Spec’s, like length, width, height, etc. below.

**Listing of parts included**
	click to enlarge
2 hulls		Including: all the fittings. To be mounted after painting. You will have to place in the the rudder container and keel-fin shaft.
2 rudder hutch		Accsess hutch to rudder command, to be assembled to hull, with hutch, hinges and lock nut.
1 forward bridge		Including: all fittings, shrouds. To be mounted after painting. Size: 1.27 m
1 stern bridge		Including: fittings for the net. To be mounted after painting. Size: 1.27 m
1 cabin		Including: all fittings, servo mounting board, roof and windows plot. All to be mounted after painting.
1 mast		Fiber glass. With all it´s fittings and rigging, witch you will have to adjust to the right place. Lenght: 2.50 m
1 spanker boom		Including fittings. To be mounted. 80 cm Fiber glass.
1 boom		65 cm. Made of Dural. Base painting.
1 sail kit	Click to wiew	Material: rip-stop Nylon FORTEX Main and jib. Straight cut - one piece. Colour: White
2 rudder		Must be bond together. Includes: silicon seal, push arm and rod.
2 keel fins		Has to be bonded together.
1 servo mountin board		Interconects foward bridge and stern bridge, pre cut ready for servo mounting.
1 net		Below bridge security net, including ties.
1 wooden box		Primary shipping and transportation box, plywood.
1 servo signal breaker		RC-Superyachts spetial y developed signal breaker (one signal for two servos) with independant power supply.
1 container		Protection container (for signal breaker, (reciever, batteries, not included))